The GANTRAIL 1120/12 adjustable crane rail clip is designed to fix heavy rails, on narrow supports, in the most arduous applications. It can withstand a horizontal force from the rail of 120kN (12.2 tonnes). Its low profile allows it to be used with cranes that are fitted with guide rollers.
The GANTRAIL 1216/15 adjustable crane rail clip is designed to fix heavy rails, on narrow girders, in the most arduous applications. It can withstand a horizontal force from the rail of 165kN (16.8 tonnes). Its low profile allows it to be used with cranes that are fitted with guide rollers.
The GANTRAIL 1220/20 adjustable crane rail clip is designed to fix the largest rails in the most arduous applications. It can withstand a horizontal force from the rail of 235kN (24 tonnes). Its low profile allows it to be used with cranes that are fitted with guide rollers.
The GANTRAIL 2119/15 adjustable crane rail clip is designed to fix heavy rails in the most arduous applications. It can withstand a horizontal force from the rail of 120kN (12.2 tonnes). Its low profile allows it to be used with cranes that are fitted with guide rollers.
The GANTRAIL 2219/20 adjustable crane rail clip is designed to fix the largest rails in the most arduous applications. It can withstand a horizontal force from the rail of 235kN (24 tonnes). Its low profile allows it to be used with cranes that are fitted with guide rollers.
This clip is designed to be welded to heavy rails in arduous conditions. It is capable of withstanding side loads of up to 120KN (12.2 tonnes). Its low profile is suited to use with cranes fitted with guided rollers.With a maximum horizontal rail adjustment of 15mm, this self-tightening clip is supplied with a bolt, nut and washer.
The GANTRAIL 9112/08 adjustable crane rail clip is designed to fix light rails, on narrow girders, in the most arduous applications. It can withstand a horizontal force from the rail of 20kN (2.0 tonnes). Its low profile allows it to be used with cranes that are fitted with guide rollers.
With its weldable base, this clip is designed to fix heavy rails in arduous conditons. Having a maximum horizontal rail adjustment of 15mm, this self-tightening clip is supplied with a bolt, nut and washer.
Top of our range of weldable two-hole clips, this clip was designed to fix long rails to narrow support structures. With a horizontal rail adjustment of 8 mm, it is supplied with captive bolts, nuts and washers.
Heavyweight of our range of weldable clips, this model is suited to the heaviest rails subject to the most stringent constraints. An entire range of varying formats provides the utmost flexibility to cover the largest rail sections. This model comes with a horizontal range of 20 or 18 mm, captive bolts, nuts and washers.
The GANTRAIL 9220/30 adjustable crane rail clip is designed to fix the largest rails in the most arduous applications. It an withstand a horizontal force from the rail of 300kN (30.6 tonnes). Its low profile allows it to be used with cranes that are fitted with guide rollers.